EVS Multicam LSM Operating Manual

Issue
10.01.F
EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
138
12.5.3 HOW TO ADD A CLIP TO A TIMELINE
From the Remote Panel, you can add a clip at the end of a timeline created
either with IPEdit or with Multicam.
To add a clip to a timeline, proceed as follows:
1. Recall the requested timeline by selecting its page (SHIFT + Page +
F_ key) and bank (SHIFT + F10) and the timeline position (F_ key).
This becomes the current timeline.
2. Recall the clip to insert at the end of the timeline by selecting its
page, bank and position.
3. Press the ENTER key on the Remote Panel.
The clip is inserted at the end of the timeline.

EVS Multicam LSM Specifications

General

Brand	EVS
Model	Multicam LSM
Category	Remote Control
Language	English