EVS Multicam LSM - Page 131

Issue
10.01.F
EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
122
In dual stereo mode
*PL11/03* LEFT 06:42:22
V Mix 02:25 Spd.Unk
A Mix 02:25 A.Del. 00:00
IN-00:00:00 OUT+00:00:27
00:10
■■■ ■■ 3→1 3→3
■■ ■ 4→2 4→4
12:23:45:13 00:07:13 100
112B/04 ClipName 999/999
In stereo mode
*PL11/03* LEFT 06:42:22
V Mix 02:25 Spd.Unk
A Mix 02:25 A.Del. 00:00
IN-00:00:00 OUT+00:00:27
00:10
■■■ 2→1
■■ 2→2
12:23:45:13 00:07:13 100
112B/04 ClipName 999/999
One can set as many swap points as needed.
If only an IN swap point is set for one clip, the audio tracks will be reset by
default for the next clip in the playlist.
Please note that when a swap point is set, a cross-fade is played between
the original audio track and the new track. The duration of the cross-fade is
the default audio transition.
When a swap point is present in a playlist, the display on the VGA and on
the OSD changes: a “*” is added next to the audio Fx information.
Display on the VGA
Display on the OSD
*PL11/03* LEFT 06:42:22
V Mix 02:25 Spd.Unk
A Mix*02:25 A.Del. 00:00
IN-00:00:00 OUT+00:00:27