Issue
10.01.F
EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
72
Select a local keywords file from the Setup. If you select “SERVER” as
keywords file in the setup, i.e. the file distributed by the network server, you
will not be allowed to edit it.
Go to the Off-Air Keyword Screen by pressing F7 on the keyboard. If you
want to create a backup copy of the current file, press F5:SAVE AS in that
screen (or click on the function with the stylus) and enter the name of the
file you want to create. This can also be used to create a local copy of the
keywords file distributed by the Network Server.
Note
If a .KWD file with the same name already exists in the KWD
directory, it will automatically be overwritten by the new file.
To edit a keyword in the current file, move the cursor to the desired keyword
location, using either the arrow keys or the stylus, then type the new
keyword. This one will appear in the Name field at the bottom of the screen.
Press ESC to clear the whole field or <BACKSPACE> to delete the last
character. To apply the value entered in the name field to the selected
keyword, press F4:UPDATE KWD, or click on that function with the stylus.
Repeat this operation for all keywords to update.
Press PgU/PgDn to toggle between Page 1 (keywords 1 to 100) and Page 2
(keywords 101 to 200), or click on the Up/Down red arrows on the right side
of the screen.
If your machine is the actual Network server, the updated file is
automatically sent to all other users on the network every time a keyword is
updated.
To Next Page
Loading...
Need help?
General
