Extron electronics SMP 111 - Page 85

SMP 111 • Remote Communication and Control 78
Command and Response Tables (continued)
Command
Function
SIS Command
(Host to Device)
Response
(Device to Host)
Additional Description
Port Assignment
NOTES:
• Duplicate port# assignments are not permitted (for example, the Telnet and Web port assignment cannot be the same) and will return
the E13 error.
• Remapping of port# assignments must be to ports 1024 or higher (unless resetting to the default port number or disabling the port by
setting it to 0).
Telnet port
Set Telnet port map
E
[port#]MT
}
Pmt[port#]
]
Reset Telnet port
map
E
23MT
}
Pmt 00023
]
Reset the Telnet port to the
default value (23).
Disable Telnet port E
0MT
}
Pmt 00000
]
View Telnet port map E
MT
}
[port#]
]
Web port
Set Web port map
E
[port#]MH
}
Pmh[port#]
]
Reset Web port map
E
80MH
}
Pmh 00080
] Reset the Web port to the
default value (80).
Disable Web port
E
0MH
}
Pmh 00000
]
View Web port map
E
MH
}
[port#]
]
SNMP port
Set SNMP port map
E
A[port#]PMAP
}
Pmap A[port#]
]
Reset SNMP port
map
E
A 161PMAP
}
Pmap A 00161
] Reset the SNMP port to the
default value (161).
Disable SNMP port
E
A 0PMAP
}
Pmap A 00000
]
View SNMP port map E
A PMAP
}
[port#]
]
SSH port
Set SSH port map
E
B[port#]PMAP
}
Pmap B[port#]
]
Reset SSH port map E
B 22023PMAP
}
Pmap B 22023
] Reset the SSH port to the
default value (22023).
Disable SSH port
E
B 0PMAP
}
Pmap B 00000
]
View SSH port map E
B PMAP
}
[port#]
]
SSL port
Set SSL port map
E
S[port#]PMAP
}
Pmap S[port#]
]
Reset SSL port map E
S 443PMAP
}
Pmap S 00443
] Reset the SSL port to the
default value (443).
Disable SSL port E
S 0PMAP
}
Pmap S 00000
]
View SSL port map E
S PMAP
}
[port#]
]