FARGO electronics DTC500 Series - Adjusting Ribbon Type and Color Matching

RESTRICTED USE ONLY FARGO Electronics, Inc.
DTC500 Series Card Printer/Encoders Troubleshooting Guide (Rev. 3.0)
112
Adjusting for the Ribbon Type
Use the Ribbon Type dropdown menu to match the Ribbon type.
Step
Procedure
1 Adjust to match the Ribbon Type selection with the Ribbon Type already loaded in
the Printer.
• YMCKO: Yellow, Magenta, Cyan, Resin Black, Overlay
OR,
• YMCKOK: Yellow, Magenta, Cyan, Resin Black, Overlay, Resin Black
OR,
• BO: Dye Sub Black, Overlay
OR
• K: Standard or Premium Resin
OR
• Colored Resin: Colored Resin is available in Red, Blue, Green, or White
OR
• Metallic Resin: Metallic Resin is available in Gold or Silver
OR
• Scratch-Off Resin