RESTRICTED USE ONLY FARGO Electronics, Inc.
DTC500 Series Card Printer/Encoders Troubleshooting Guide (Rev. 3.0)
143
Using the Magnetic Track Selection option
Use these options to customize the ISO encoded data format for each of the Magnetic
Stripe's three tracks.
Step Procedure
1 Specify which of the three (3) tracks to customize by selecting one of the three
track options.
• After making the required selection, the Magnetic Track options box displays
the current set of customization options for the selected track.
• Remember that each track must be customized independently of the other
two tracks.
To Next Page
Loading...
