EasyManua.ls Logo

FARGO electronics DTC500 Series - Reviewing the Card Count YMC Self-Test; Reviewing the Standard Resin Self-Test

FARGO electronics DTC500 Series
220 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RESTRICTED USE ONLY FARGO Electronics, Inc.
DTC500 Series Card Printer/Encoders Troubleshooting Guide (Rev. 3.0)
192
Reviewing the Card Count YMC Self-Test
Step Procedure
1 Use this card to view counts for Card Count (CC), and Pass Count (PC).
The Card Count is the total number of cards the Printer has produced. Pass
Count is the total number of print passes made by the Printhead. (Note: A
pass is measured each time a single Ribbon panel is printed or passes
beneath the Printhead.)
Reviewing the Standard Resin Self-Test
Step Procedure
1 Print this card with any resin Ribbon. However, it will work best with a standard
resin black Ribbon.

Table of Contents

Other manuals for FARGO electronics DTC500 Series

Related product manuals