FARGO electronics DTC500 Series - Adjusting Resin Dither and Print Options

RESTRICTED USE ONLY FARGO Electronics, Inc.
DTC500 Series Card Printer/Encoders Troubleshooting Guide (Rev. 3.0)
114
Adjusting for the Resin Dither
Use the appropriate Dither method according to the type of image to be printed. (Note: This
option only affects those objects printed with the resin black panel.)
Step Procedure
1
Select Optimized for Graphics when printing lower quality images (e.g., clipart,
logos, etc.) with resin.
OR
Select Optimized for Photo when printing photo quality images with resin.