RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0)
271
Showing the Card Count
Step Procedure
1
Choose SHOW CARD COUNT to view counts for Card Count (CC) and Pass
Count (PC).
Card Count is the total number of cards the Printer has produced.
Pass Count is the total number of print passes made by the Printhead.
(Note: A pass is measured each time a single Ribbon panel is printed or
passes beneath the Printhead.)
Selecting the System Upgrade (Firmware Upgrade)
This option is used to upgrade the Printer Firmware.
Step Procedure
1
Upgrade by selecting SYSTEM UPGRADE.
The LCD will prompt: Are you sure you want to continue?
2
Select YES to begin the System Upgrade.
OR
Select NO to return to the READY screen. See the the Updating the Printer’s
Firmware procedure in Section 9, page 275.
To Next Page
Loading...
