FARGO electronics DTC510 - Printer Components: Card Input and Output Hoppers

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0)
48
Printer Components: Card Input and Output Hoppers
Type Description
Card Input
Hopper
The Card Input Hopper is where cards are initially loaded for printing, as
shown below. The Printer's hopper provides a large door that opens up
wide to make card loading simple and closes securely to help protect the
card stock. (Note: The Printer will hold a maximum of 100 cards in each
Card Input Hopper, based on a standard 30 mil. card thickness.)
Card Output
Hopper
All standard Card Printers provide a 100 card capacity Card Output
Hopper (based on a standard 30 mil card thickness). (Note: This hopper
stores the cards after they are printed.)