RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0)
283
Unpacking the Card Printer
Step Procedure
1 Remove the handles for the side of the box to release the Cover.
2 Remove the Cover and set it aside (upturned) in order to hold its parts.
3 a. Remove the Printer from the box.
b. Place the foam back inside the box cover.
4 Set the Printer on the bench and remove the plastic bag wrap.
5 Remove the shipping tape from the Output Hopper, the Cover, and the
Communication Ports. (Note: Do not discard the tape since it can be used
again during repackaging.)
6 a. Open the print Cover.
b. Remove the blue-colored Quality Assurance Certificate and the white-colored
Cleaning Cartridge (D850254) Instruction sheet.
To Next Page
Loading...
