FARGO electronics DTC510 - Reviewing the Required Tools; Reviewing the Required Media Supplies

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0)
281
Reviewing the required Tools
 Phillips #1 screwdriver (1)
 Torx T10 screwdriver (1)
 Centronics parallel print cable (1)
 Computer (1)
 Software: Requires (a) DTC500 Firmware version 1.5.1 (510858; included with diskette);
(b) FARGO Firmware Updater Program (included with Software Installation CD
); and (c)
DTC500 Printer Driver (included with Software Installation CD
).
Reviewing the required Media supplies
 30 mil UltraCards cards (081754)
 YMCKO Ribbon (086031)