RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0)
30
Technical Specifications (continued)
Term Description
Options
Printer Cleaning Kit
External Print Server (Windows only; required for stand-alone
networking of printer/encoders)
Card Lamination Module (DTC515 and DTC525 only)
Embedded Fonts and Bar Codes to print from AS/400, mainframe
and other systems
o Code 39, Code 128 B & C with and without check digit
o 2 of 5
o UPC-A
o EAN 13
o PDF-417 2D bar code and other symbologies available via
Windows driver
o Resident: Swiss Bold 8, 10, 12, 14, 16, 18 and 22
Encoding Options
ISO Magnetic Stripe Encoding Module, dual high- and low-
coercivity, Tracks 1, 2 and 3
JIS II Magnetic Stripe Encoding Module
E-Card Docking Station (required for all e-card options or 3
rd
party
Smart card encoding)
Contactless Smart Card Encoder (MIFARE)
Contact Smart Card Encoder reads from and writes to all
ISO7816-1/2/3/4 memory and microprocessor smart cards (T=0,
T=1) as well as synchronous cards
Prox Card Encoder (HID read-only); I class
Fargo Certified
Supplies
Fargo Card Printer/Encoders require highly specialized media to
function properly. To maximize printed card quality, printhead life and
printer/encoder reliability, use only Fargo Certified Supplies. Fargo
warranties are void, where not prohibited by law, when non-Fargo
Certified Supplies are used.
Printing
Resolution
Up to 16.7 million colors and 256 shades per pixel.
300 dpi (11.8 dots/mm)
Continued on the next page
To Next Page
Loading...
