EasyManua.ls Logo

FEC Handheld Nutrunner HFC3000 - Page 122

FEC Handheld Nutrunner HFC3000
231 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 6 Fastening Operation
PAGE 6-52
D-No.309 Message Block Byte Length [byte] (Fieldbus only)
The programmed message block byte length of the fieldbus set in the controller is indicated.
Fieldbus type
CC-Link
DeviceNet
PROFIBUSDP-V1
PROFINET IO
EtherNet/IP
144byte
250 byte
64 byte
250 byte
250 byte
D-No.310 Message Setting Byte Length “PLC HFC3000 [byte] (Fieldbus only)
The programmed message setting byte length for “PLC HFC3000” of the installed fieldbus is
indicated.
D-No.311 Message Setting Byte Length HFC3000 PLC” [byte] (Fieldbus only)
The programmed message setting byte length for HFC3000 PLC” of the installed
fieldbus is indicated.
D-No.312 IP Address (upper 6 digits) D-No.313 IP Address (lower 6 digits)
Setting range: 0 ~ 255 (PROFINET IO, EtherNet/IP)
The programmed IP address of the installed fieldbus is indicated.
D-No.314 Subnet Mask (upper 6 digits) D-No.315 Subnet Mask (lower 6 digits)
Setting range: 0 ~ 255 (PROFINET IO, EtherNet/IP)
The programmed subnet mask of the installed fieldbus is indicated.
D-No.316 Gateway (upper 6 digits) D-No.317 Gateway (lower 6 digits)
Setting range: 0 ~ 255 (PROFINET IO, EtherNet/IP)
The programmed gateway of the installed fieldbus is indicated.

Table of Contents