Festo CMMS-AS Series User Manual

9 Opera tional functions
Festo – GDCP-CMMS/D-FW-EN – 1404NH – Engli sh 201
9.2 .2 Connection: Digital inpu t
The connection diagram shows the required digital input for the flying measurement.
CMMS/CMMD
6
Festo Configuration Tool ( FCT)
Sample input (DIN9)
11
X5
1)
X4/X5
1)
/EXT/EXT1
...
Load “DIN/DOUT” (GND 24 V)
Fieldbuses
X1
...
...
X2
Motor encoder
1) The connection [X5] can either be used for the Festo Configuration Tool (FCT) or for the fieldbus “RS485”.
Fig. 9.4 Connection: Digital input

Festo CMMS-AS Series Specifications

General

Brand	Festo
Model	CMMS-AS Series
Category	Controller
Language	English