Festo CMMS-AS Series User Manual

5 Commissioning
Festo – GDCP-CMMS/D-FW-EN – 1404NH – Engli sh 89
5.2.4 Device data ( FCT)
The device data contains all of the data that has been parameterised, c onfigured and saved via the
Festo Configuration Tool ( FCT).
5.2.5 Downloading/synchronising/uploading/ saving device data
(FCT <</<=>/>> motor controller)
The device data can be transferred between the FCT and the motor controller as follows:
– Download (>>): From FCT to the motor controller
– Upload ( <<): From the motor controller to the FCT
– Synchronisation (<=>): Between FCT and motor controller
Note
Loss of device data
If the “control se ction” power supply is interrupted, any modifications made to the
device data that have not been saved to the permanent memory will be lost.
– Save all modifications made to the device data in the permanent memory of the
motor controller (FCT: S ave).

Festo CMMS-AS Series Specifications

General

Brand	Festo
Model	CMMS-AS Series
Category	Controller
Language	English