Festo CMMS-AS Series User Manual

5 Commissioning
90 Festo – GDCP-CMMS/D-FW-EN – 1404NH – English
The pro cess for transferring device da ta can be started via the following buttons.
1
CMMS/CMMD
Permanent
memory
2 Download
FCT
Device
data
X5
1 Upload
3 Synchronisation
4 Save
Main
memory
2
3
4
RS232
Festo Configuration Tool (FCT)
1 Upload
The c urrent devic e data on the motor
controller is loaded into the Festo
Configuration Tool (FCT).
2 Download
The c urrent devic e data on the Festo
Configuration Tool ( FCT) is loaded into the
motor controller.
3 Syncronisation
The devic e data on the Festo Configuration
Tool ( FCT) and the motor controller is
synchronised.
4 Store
The devic e data is saved from the main
memory to the permanent memory of the
motor c ontroller.
Fig. 5.6 Overview: Downloading/synchronising/uploading/saving device data
(FCT <</=/>> motor controller)

Festo CMMS-AS Series Specifications

General

Brand	Festo
Model	CMMS-AS Series
Category	Controller
Language	English