Fike FCP-300 - Network Management Quick Reference

Network Management Quick Reference Network Management
FCP-300/FCP-300ECS Manual — P/N LS10145-002FK-E:A 3/12/2021 67
6.5 Network Management Quick Reference
Menu Options/Defaults Comments
Network
Programing
Learn
Network
Guest or member
Add or remove panels
into the network
See Section 6.2.1
Edit Network
Names
Panel Names Network Panel ID Edit Panel Names
See Section 6.2.2
Site Names Edit Site Member Edit Site Names
Edit Panel ID
Change current
panel ID
See Section 6.2.3
Computer
Access
Computer Access
Number
*123456
See Section 6.2.4
Computer Code *0
Access Codes
Select Profile
(01 - 20)
Edit Name
Profile 1 is the profile that dictates
what functions the Firefighter Key
has access to. Because this is the
profile for a keys, the user name
and the access code can not be
edited for this profile.
Profile 2 is the profile for the
installer and is referred to as the
“Installer Code”. This profile’s
user name and panel functions
can not be edited.
See Section 6.2.5.
Edit Access Code
Panel Functions
System Reset
System Silence
System ACK
Fire Drill Key
System Tests
Fire Drill Menu
Indicator Test
Walk Test-No Report
Walk Test-With
Report
Communicator Test
Clear History Buffer
Point Functions
Disable/Enable Buffer
Point Status
Set SLC Device
Address
SLC Single Device
Locator
Network
Programming
(cont.)
Access Codes
Select Profile
(01 - 20)
Panel Functions
SLC Multi-Device
Locator
Profile 1 is the profile that dictates
what functions the Firefighter Key
has access to. Because this is the
profile for a keys, the user name
and the access code can not be
edited for this profile.
Profile 2 is the profile for the
installer and is referred to as the
“Installer Code”. This profile’s
user name and panel functions
can not be edited.
See Section 6.2.5.
I/O Point Control
Event History
Set Time & Date
Network Diagnostics
Network
Programming
Panel Programming
System Information
Multi-Site
Upload/Download
F1 Function Key
F2 Function Key
F3 Function Key
F4 Function Key
ECS Control Request
Function
ECS Super User
Function
Send/Receive
Firmware Update
Communicator
Options
Communicator
Assignments
Select Panel Primary 0= unused See Section 6.2.6
Communicator
Miscellaneous
SIA Options
Enable pi SIA Modifier See
“Communicator
Miscellaneous” on
page 63.
Include Panel ID in SIA Reporting
Table 6.5 Network Management Quick Reference Chart