Description
6 MMS
®
Inspection DPM High
2.3 Keys
There are 4 keys for operating the gage.
The bottom line of the display always shows the functions of the 4 keys (see il-
lustration below). The assignment depends on the open page.
The function shown on the display is assigned to the key directly underneath (example).
The key has two functions:
switches the gage on and off when the key is held for at least 1 s.
opens/activates the function shown in the bottom line of the display.
The key has two functions:
moves the cursor/mark down when is shown in the bottom line of
the display.
opens the main menu when is not shown in the bottom line of the
display.
A description of the remaining key symbols can be found starting on page 91
To Next Page
Loading...
