Managing batch files
61
MMS
®
Inspection DPM High
9.1 Assigning/changing batch name
You can rename every batch.
Keep in mind that there are many batch files stored in the gage. A unique
name makes the selection process easier.
Navigation
: Selects – parameter/value
: Confirms – selection/setting
Moves – cursor to the right
: Cancels – leave page/menu without saving the changes
Moves – cursor to the left
To change the name of a batch
1. Call up the Rename function: Main menu ( ) > Batches > OK > select
desired batch > OK > Rename > OK.
2. Change the name:
Move cursor by means of the and OK keys.
Select the desired character by means of the keys.
Delete character: Select space ( ).
3. Exit the dialog page
Rename
:
aUsing the OK key to move the cursor to the far right until the character
appears at the right edge of the display.
b Exit the dialog page: OK.
The batch name has now been renamed.
What you can do next
Go to the Measurement view: MEASURE > OK, measure, see page 28.
Go to the main menu:
2x
.
To Next Page
Loading...
