Evaluation
32 MMS
®
Inspection DPM High
7Evaluation
The gage provides you with the sometimes complicated and time-consuming
mathematical calculations that are needed for statistical evaluation of the cli-
matic readings of the opened batch. The evaluation is updated continuously
during measurement.
The statistic characteristic variables of the opened batch are displayed in the
Statistics menu. The statistic characteristic variables for the measured and de-
termined climatic variables are considered and displayed in the statistical eval-
uation.
Limitation of liability
The manufacturer accepts no liability and no responsibility for the preci-
sion, conclusions, and interpretation of the measurement results. Only
continuous monitoring of the measurement devices by the user can guar-
antee the continued precision of measurements. The manufacturer ac-
cepts no liability or responsibility for consequential damage caused by the
use of incorrect measured readings.
Evaluations for the entire batch
Statistical characteristic variables for each climatic variable, see page 33
Statistical characteristic variables of all climatic variables of the opened
batch, see page 34
Run chart of each climatic variables, see page 35
Before you start
The batch for which you want to view the evaluations is open.
Navigation
: Selects – climatic variable
: Confirms – selection/setting
: Exits – page/menu
: Scrolls – to next page
To Next Page
Loading...
