FISCHER MMS - Settings for Measurement

Settings for measurement
20 MMS
®
Inspection DPM High
5 Settings for measurement
In order to measure, you need to create and open a Batch (measuring applica-
tion file, batch file). Settings, such as those for the measurement procedure are
saved in the batch, e.g. specification limit monitoring.
Overview of the possible settings you have to make before a measurement.
Settings Page
Creating a new batch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Opening a batch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Monitoring specification limits, setting/changing specification limits . . . . . . . 24
Deactivating specification limit monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Alarm function, limit settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Automatic data logging (log function) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27