Managing batch files
63
MMS
®
Inspection DPM High
9.3 View batch infos
You can view all the settings you have made for the open batch (Batch Infos).
Before you start
The batch for which you want to view the information is open in the gage.
Navigation
: Selects – parameter/values
: Confirms – selection/setting
:Exits – page/menu
To call up the batch infos
► Main menu ( ) > Batch Modify > OK > Batch Infos > OK
For a description of the information parameter, see page 94.
The opening of the batch info page is finished.
What you can do next
Go to the Measurement view: 2x > , measure, see page 28.
Make settings for the open batch: 1x .
Go to the main menu: 2x .
To Next Page
Loading...
