FISCHER MMS - Gage

Description
5
MMS
®
Inspection DPM High
2.2 Gage
Front of gage Rear of gage
1 Eyelets for a carrying strap
2 Signal lamp for displaying the alarm signal for limit violations (alarm
function)
3Display
4 Keys, On/off key, for description see page 6
5 Type K connection below the cover for connecting a type K (magnetic)
temperature probe. When a temperature probe is connected, the function
of the gage surface temperature probe (6) is automatically switched off.
6 Gage surface temperature probe (protective cap in scope of supply)
7USB port
8 Battery compartment cover
9 Air temperature and humidity probes protected by the housing grille
Gage dimensions can be found in the data sheet, page 12
1
3
4
5
6
2
7
8
9