FISCHER MMS - Set up; Switching on the Gage; Switching off the Gage

Set up
17
MMS
®
Inspection DPM High
3Set up
3.1 Switching on the gage
► Press the key for approx. 1 s.
The display shows the main menu or Measurement view of the batch that
was open when the gage was switched off.
What you can do next
 Measure, see page 28
 Make settings for the measurement, see page 20.
 Create a new batch, page 21.
3.2 Switching off the gage
► Press the key for approx. 1 s.