Gage settings
74 MMS
®
Inspection DPM High
10.7 Used battery type
You must select the battery type of the inserted batteries/rechargeable batter-
ies so that the gage can correctly display the charge status of the used batter-
ies/rechargeable batteries.
Navigation
: Selects – parameter/value
: Confirms – selection/setting
:Exits – page/menu
: Cancels – leaves page/menu without saving the changes
To select the used battery type
► Main menu ( ) > Gage Settings > OK > More Settings > OK > Battery
Type > OK > select used battery type > OK
Battery type is activated:
The selection is finished.
What you can do next
Go to the Measurement view: 2x > , measure, see page 28.
Make further gage settings: 1x .
Go to the main menu:
2x
.
.
To Next Page
Loading...
