Gage settings
73
MMS
®
Inspection DPM High
10.6 Date & time
You can set the date and time as well as the date and time format for the gage.
Navigation
: Selects – parameter/value
: Confirms – selection/setting
Moves – cursor to the right
:Exits – page/menu
Moves – cursor to the left
: Cancels – leaves page/menu without saving the changes
To set the date & time
► Main menu ( ) > Gage Settings > OK > Date & Time > OK > set time/date
or select time/date format > OK > set desired value/select desired format >
OK
Parameter is activated:
The settings are now finished.
What you can do next
Go to the Measurement view: 2x > , measure, see page 28.
Make further date and time settings: > OK.
Make further gage settings: 1x .
To Next Page
Loading...
