Gage settings
72 MMS
®
Inspection DPM High
Dim display
The brightness of the display will be automatically dimmed to a preset lu-
minosity value after a preset time period.
Switch-off time 0 min: function disabled, no automatic gage switch-off or
display dimming will be performed
max. switch-off time: 1000 min
Navigation
: Selects – parameter/value
: Confirms – selection/setting
Moves – cursor to the right
:Exits – page/menu
Moves – cursor to the left
: Cancels – leaves page/menu without saving the changes
To set the time periods for enabling the Energy Savings functions
1. Main menu ( ) > Gage Settings > OK > Energy Savings > OK
2. Select the desired function:
> OK
.
3. Set desired time value:
> OK
.
The setting is finished.
Repeat steps 2. and 3. for the other functions.
What you can do next
Go to the Measurement view: 3x > , measure, see page 28.
Make further gage settings: 2x .
Adjust brightness for the display dimming; see page 68.
To Next Page
Loading...
