Data transfer
58 MMS
®
Inspection DPM High
Mixing measured readings
As long as you have not finished the online measurement in the CAQ program,
you can transfer the climatic values from measurements with different batches
to the open CAQ measurement file!
► Finish the online measurement in the CAQ program before you perform
another online measurement with a different batch!
► Save your climatic values per batch separately in different CAQ measure-
ment files.
What you can do next
Delete climatic values stored in the open batch, the Measurement view is
open:
> All Readings > OK >
Transferring all climatic values of the open batch to the CAQ system
► Gage – Start the data transfer in the Statistics view: Main menu ( ) >
Statistics > OK > > Export Batch > OK.
The climatic values are transferred to the CAQ program.
What you can do next
View the batch statistics, the Measurement view is open: Main menu ( )
> Statistics > OK; see also page 33.
Go to the Measurement view: 2x > , measure, see page 46.
Delete climatic values stored in the open batch, the Measurement view is
open:
> All Readings > OK > .
8.6 Settings for the Bluetooth-gage pairing
To pair the gage with a different Bluetooth-capable device (PC, smartphone,
tablet), you can make the following settings:
Device name under which the gage is visible to the other Bluetooth-capa-
ble device (PC etc.). Factory setting: MMS Inspection
Pairing authorization with PIN, which means enhanced security for the
pairing; for a description, see also page 98
To Next Page
Loading...
