Data transfer
59
MMS
®
Inspection DPM High
Power level; you can extend the battery runtime by reducing the signal
strength (range) for Bluetooth
Navigation
: Selects – parameter/value
: Confirms – selection/setting
Moves – cursor to the right when entering a name
:Exits – page/menu
Moves – cursor to the left when entering a name
To set the parameters for the Bluetooth-gage pairing
1. Open the settings menu: Main menu ( ) > Gage Settings > OK > Data
Transfer > OK > PCDatex > OK > Bluetooth Classic > OK > Settings > OK.
2. Select the desired parameter and/or enable/disable the desired para-
meter:
> OK
.
Device Name – change gage name
Move cursor by means of the and OK keys.
Select the desired character by means of the keys.
Delete character: select space.
Leave the Device Name page: Using the OK key to move the cursor to
the far right until the symbol appears at the right edge of the dis-
play > OK.
Pairing with PIN, meaning of the term see page 98
Enable/Disable via OK, Parameter is enabled: .
Transmission Power – select transmission power, meaning of the term
see page 98
> OK,
Parameter is activated:
3. Exit the settings menu: Press the key until the desired menu appears.
What you can do next
Pairing the devices (gage an PC (example)) for the Bluetooth connection,
for an overview, see page 36.
To Next Page
Loading...
