FISCHER MMS - Log Function (Auto Logging)

Settings for measurement
27
MMS
®
Inspection DPM High
5.5 Log function (Auto Logging)
You can automatically log all climate values according to a preset time interval.
Definable time interval: 1…99minutes
Before you start
 The batch for which you want to make the change is open.
Navigation
: Selects - parameter/value
: Confirms - selection/setting
: Exits - page/menu
Cancels the setting process and exits the function without saving any
changes
To set the time interval for automatic data logging
► Main menu ( ) > Batch Modify > OK > Auto Logging > OK > Interval
[min] > set time interval > OK
The setting is now finished.
What you can do next
 Make further settings for the measurement: 1 x .
 Start automatic data logging: 2x > > > ; see also page 28.
OK