Gage settings
66 MMS
®
Inspection DPM High
10.1 Language
You can set a desired display language for the gage.
Navigation
: Selects – parameter/value
: Confirms – selection/setting
:Exits – page/menu
To select the language
► Main menu ( ) > Gage Settings > OK > Language > OK > select desired
language > OK
Language is activated:
The selection is finished.
What you can do next
Go to the Measurement view: 1x > , measure, see page 28.
Make further gage settings: > OK.
Go to the main menu:
1x
.
To Next Page
Loading...
