FISCHER MMS - Data Transfer

Data transfer
36 MMS
®
Inspection DPM High
8 Data transfer
Data transfer via USB interface
Transferring climatic values to an Excel file via PC Datex . . . . . . . . . . . . . . . . . 39
Transferring climatic values to the Fischer DataCenter . . . . . . . . . . . . . . . . . . . 44
Transferring climatic values to a CAQ system
(Computer Added Quality). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Data transfer via Bluetooth
Transferring climatic values to an Excel file via PC-Datex . . . . . . . . . . . . . . . . . 50
Transferring climatic values to a CAQ system
(Computer Added Quality). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
PC-Datex is a software program for importing data to the Office program
MS Excel. You can download the PC-Datex program free of charge from
the Fischer download page and link it to the Office program MS Excel as
an Excel add-in.
Information on how to use the Fischer PC-Datex program can be found in
the corresponding Operator's Manual (
 PC-Datex)
The Fischer DataCenter is a software solution for evaluating measured
readings, creating inspection reports, archiving measured readings and
inspection reports, as well as for exporting the measured readings in CSV
format. Data transfer to Fischer DataCenter possible only via USB connec-
tion. We recommend using software version 2.6 or higher. You can down-
load the Fischer DataCenter program free of charge from the Fischer
download page.
Information on how to use the Fischer DataCenter program can be found
in the corresponding Operator's Manual (
 Fischer DataCenter)
Fischer download page: https://docs.helmut-fischer.com/st9
Switching interface from Bluetooth Classic to USB: switch gage off and on
again.