Managing batch files
64 MMS
®
Inspection DPM High
9.4 Change the unit of measurement for temperature
You can change the temperature unit of measurement for the open batch and
batch statistics.
Before you start
The batch for which you want to make the change is open in the gage.
Navigation
: Selects – parameter/value
: Confirms – selection/setting
, :Exits – page/menu
To change the unit of measurement
► Main menu ( ) > Batch Modify > OK > Temperature Units > OK > select
°C or °F > OK
Unit of measurement is activated:
The change of the unit of measurement is finished. The previous temperature
values and statistical evaluations are converted according to the set unit of
measurement.
What you can do next
Go to the Measurement view: 1x > , measure, see page 28.
Make further batch settings: .
To Next Page
Loading...
