Settings for measurement
26 MMS
®
Inspection DPM High
5.4 Alarm monitoring
You can monitor and signal during the measurement whether the climatic read-
ings are above or below of threshold. A red flashing signal light indicates a limit
violation.
Before you start
The batch for which you want to make the change is open.
Navigation
: Selects – parameter/value
: Confirms – selection/settings
: Exits – page/menu
Cancels the setting process and exits the function without saving any
changes
To set the alarm for monitoring a climatic variable
► Main menu ( ) > Batch Modify > OK > Alarm Settings > OK > select
climatic variable > OK > select threshold > OK > set desired limit value > OK
The setting is now finished.
What you can do next
Make further alarm settings: 1x > select climatic variable > OK >
select threshold > OK > set desired limit value > OK.
Activate visual signaling, page 67.
Measure, see page 28
To Next Page
Loading...
