Settings for measurement
25
MMS
®
Inspection DPM High
What you can do next
Go to the Measurement view: 3x > .
Make further limit settings: 1x > select climatic variable > OK >
further with step 3.
Make further settings for the measurement: 2 x .
Measure, see page 28
5.3.2 Deactivating specification limit monitoring
Before you start
The batch for which you want to make the change is open.
Navigation
: Selects - parameter/value
: Confirms - selection/setting
: Exits - page/menu
To disable specification limit monitoring
► Main menu ( ) > Batch Modify > OK > Tolerance Limits > OK > select
climatic variable > OK > No > OK
Parameter No is activated:
This completes the process.
What you can do next
Go to the Measurement view: 3x > .
Deactivate further specification limit monitoring: 1x > select
climatic variable OK > No > OK.
Make further settings for the measurement: 2 x .
Delete all stored readings in the batch: Measurement view of the batch >
> All Readings > OK > .
Measure, see page 28
To Next Page
Loading...
