FISCHER MMS - Page 48

Data transfer
44 MMS
®
Inspection DPM High
8.2.3 Transfer data via USB to Fischer DataCenter
Before you start
 Fischer DataCenter program is installed on the PC, see page 42.
 All necessary connection settings have been made in the gage, see
page 42.
 The desired batch for which you want to transfer the values to the PC
during the measurement is open in the gage.
Navigation
: Selects – parameter/value
: Confirms – selection/setting
:Exits – page/menu
To transfer the climatic values
1. You start the data transfer in the General tab of the Fischer DataCenter.
2. Which data do you want to transfer?
 Transferring climatic values during the measurement to Fischer Data-
Center, see page 40
 Transferring all climatic values of the open batch to the Fischer Data-
Center, see page 45
 Transferring all climatic values of a selected batch to the Fischer Data-
Center, see page 46
Transferring climatic values during the measurement to Fischer DataCenter
1. Settings in the Fischer DataCenter:
aIn tab General, double click on the button Online and confirm the gage
selection with OK.
b Assign a file name for the new application file and save the file by using
the Save button.
cIn the Settings window, select the desired settings and confirm your
selection via OK.
2. Measure, record your climatic values
OK