Data transfer
45
MMS
®
Inspection DPM High
The climatic values will be saved in the new application file in the Fischer
DataCenter during the measurement.
Note that only the values stored via the hold function or log function are
transmitted.To end the data transfer
► Fischer DataCenter: click on the button Stop Online Measurement of the
Online Measurement window.
Mixing measured readings
As long as you have not finished the online measurement in PC-Datex, you can
transfer climatic values from measurements with different batches to the open
Excel spreadsheet!
► Finish the online measurement in PC-Datex before you take another
online measurement with a different batch!
► Transfer the measured climatic values per batch into separate Excel
spreadsheets.
What you can do next
View the statistics for the batch, the Measurement view is open: Main
menu ( ) > Statistics > OK; for additional information, see page 33.
Delete all climatic values stored in the open batch, the Measurement view
is open:
> All Readings > OK > .
Transferring all climatic values of the open batch to the Fischer DataCenter
1. Settings in the Fischer DataCenter:
aIn tab General, double click on the command button Current
Application and confirm the gage selection with OK.
b Assign a file name for the new application file and save the file by using
the Save button.
cIn the Settings window, select the desired settings and confirm your
selection via OK.
2. The climatic values from the selected batch will be saved in the new appli-
cation file in the Fischer DataCenter.
The data transfer is finished.
To Next Page
Loading...
