FISCHER MMS - Page 50

Data transfer
46 MMS
®
Inspection DPM High
What you can do next
 Go to the Measurement view: 2x > , measure, see page 46.
 Go to the main menu: 2x .
 Delete all climatic values stored in the open batch: 2x > > >
All Readings > OK > .
Transferring all climatic values of a selected batch to the Fischer DataCenter
1. Settings in the Fischer DataCenter:
aIn tab General, double click on the command button Selected
Application and confirm the gage selection with OK.
b In window select Application select the desired batch for which you
want to transfer measured readings to the Fischer DataCenter.
c Assign a file name for the new application file and save the file by using
the Save button.
dIn the Settings window, select the desired settings and confirm your
selection via OK.
2. The climatic values from the selected batch will be saved in the new appli-
cation file in the Fischer DataCenter.
The data transfer is finished.
What you can do next
 Go to the Measurement view: 2x > , measure, see page 46.
 Go to the main menu: 2x .
 Delete all climatic values stored in the open batch: 2x > > >
All Readings > OK > .