Data transfer
57
MMS
®
Inspection DPM High
8.5.3 Transfer data to a CAQ system via Bluetooth
Before you start
The CAQ program is available on PC for example.
The PC contains a Bluetooth module/port.
The CAQ system is ready for data import.
The batteries in the gage have sufficient charging capacity.
The batch for which you want to transfer the climatic values to the CAQ
system is open in the gage.
Navigation
: Selects – parameter/value
: Confirms – selection/setting
:Exits – page/menu
What would you like to do?
Transferring the climatic values to your CAQ program during the mea-
surement, see page 57
Transferring all climatic values of the open batch to the CAQ system, see
page 58
Transferring the climatic values to your CAQ program during the
measurement
► Measure, record your climatic values with the gage
The climatic values are transferred to the CAQ program during the
measurement.
Note that only the values stored via the hold function or log function are
transmitted.
To end the measurement
► CAQ program (PC): Disconnect the gage.
To Next Page
Loading...
