Settings for measurement
22 MMS
®
Inspection DPM High
5.1.2 Creating a new batch by copying
Use the function Copy to create a batch by copying a selected batch. Apart from
the readings and the batch name, the batch copy contains all the settings of the
batch copy template.
Navigation
: Selects – parameter/value
: Confirms – selection/setting
:Exits – page/menu
To create a new batch by copying
► Create a batch copy: Main menu ( ) > Batches > OK > select desired
batch as copy source > OK > Copy > OK.
This completes the creation process for a new batch file.
What you can do next
Measure, see page 28
Make settings for the measurement (e.g. set specification limits, block
size), for an overview, see page 20.
Rename this batch, see page 61.
To Next Page
Loading...
