Fluke 125 User Manual

Specifications
Harmonics Measurements
10
10-9
Harmonics Measurements
Number of Harmonics
......................................................... DC..33 (< 60 Hz)
.......................................................... DC..24 (400 Hz)
Readings / Cursor readings (fundamental 40…70 Hz)
V rms / A rms .........................fund. ±(3 % + 2 counts)
................................................ 33st ±(5 % + 3 counts)
Watt...................................... fund. ±(5 % + 10 counts)
............................................ 33st ±(10 % + 10 counts)
Frequency of fundamental............................± 0.25 Hz
Phase Angle............................ fund. ±3° ... 33st ± 15°
K-factor (in Amp and Watt)...............................± 10 %
Time base ................................................................ fixed
Field Bus Measurements
Type Subtype Protocol
AS-i NEN-EN50295
CAN ISO-11898
Interbus S RS-422 EIA-422
ControlNet 61158 type 2
Modbus RS-232
RS-485
RS-232/EIA-232
RS-485/EIA-485
Foundation
Fieldbus
H1 61158 type 1, 31.25 kBit
Profibus DP
PA
EIA-485
61158 type 1
Ethernet Coax
TP
10Base2
10BaseT
RS-232 EIA-232
RS-485 EIA-485

Fluke 125 Specifications

General

Channels	2
Safety Rating	CAT III 600 V
Resistance Measurement	Yes
Continuity	Yes
Diode Test	Yes
Harmonics Measurement	Yes
Power Measurement	Yes
Weight	1.2 kg
Current Measurement	Yes
Type	ScopeMeter
Voltage Range	600 V