Fluke 125 User Manual

Declaration of Conformity
0-1
Declaration of Conformity
for
Fluke 125
ScopeMeter
®
test tool
Manufacturer
Fluke Industrial B.V.
Lelyweg 14
7602 EA Almelo
The Netherlands
Statement of Conformity
Based on test results using appropriate standards,
the product is in conformity with
Electromagnetic Compatibility Directive 2004/108/EC
Low Voltage Directive 2006/95/EC
Sample tests
Standards used:
EN 61010-1: 2001
Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use
EN61326-1: 2006
Electrical equipment for
measurements and laboratory
use -EMC requirements-
The tests have been performed in a
typical configuration
The tests have been performed in a
typical configuration.
This Conformity is indicated by the symbol
,
i.e. “Conformité Européenne”.

Fluke 125 Specifications

General

Channels	2
Safety Rating	CAT III 600 V
Resistance Measurement	Yes
Continuity	Yes
Diode Test	Yes
Harmonics Measurement	Yes
Power Measurement	Yes
Weight	1.2 kg
Current Measurement	Yes
Type	ScopeMeter
Voltage Range	600 V