Fluke 125 User Manual

8-1
Chapter 8
Maintaining the Test Tool
Introduction
This chapter covers basic maintenance procedures that
can be performed by the user. For complete service,
disassembly, repair, and calibration information, see the
Service Manual. You will find the part number of the
Service Manual in the section ‘Parts and Accessories’ in
this manual.
Cleaning the Test Tool
Clean the test tool with a damp cloth and a mild soap to
avoid abrasion of text on the test tool. Do not use
abrasives, solvents, or alcohol.
Storing the Test Tool
If you are storing the test tool for an extended period of
time, charge the rechargeable battery pack before storing.
It is not necessary to remove the battery pack.

Fluke 125 Specifications

General

Channels	2
Safety Rating	CAT III 600 V
Resistance Measurement	Yes
Continuity	Yes
Diode Test	Yes
Harmonics Measurement	Yes
Power Measurement	Yes
Weight	1.2 kg
Current Measurement	Yes
Type	ScopeMeter
Voltage Range	600 V