Fluke 125 - Changing the Information Language

Fluke 125
User Manual
9-2
Changing the Information Language
When you operate the test tool, messages appear on the
screen. These messages are always displayed in a box,
and can be displayed in various languages.
If you want to change the language of the messages into
e.g. Italian, do the following:
c
Open the USER OPTIONS menu.
d Open the LANGUAGE SELECT
submenu.
e Highlight ITALIANO (Italian).
f Accept ITALIANO as language.
Setting the Grid Display
To choose a dotted grid, do the following:
c Open the USER OPTIONS menu.
d Highlight GRID TYPE.
e Open the GRID TYPE submenu.
f Choose DOTS.
g Accept the new grid display.
Use LINES when you need a cross hatch pattern based on
the horizontal time and vertical divisions on the screen.
Use DOTS when you need vertical and horizontal division
dots as added reference points to the screen.