Fluke 125 - Using a Printer and Flukeview; Introduction; Using a Printer

7-1
Chapter 7
Using a Printer and FlukeView
Introduction
This Chapter explains how to setup the test tool for
communication with :
z a printer to make a hardcopy of the test tool screen
z a PC or laptop to use the FlukeView software.
Using a Printer
To print a (graphic) hard copy of the present screen, you
need to use one of the following:
z The Optically Isolated RS-232 Adapter/Cable
(PM9080, optional) to connect a serial printer to the
OPTICAL PORT of the test tool. See Figure 7-1.
z The Print Adapter Cable (PAC91, optional) to connect
a parallel printer to the OPTICAL PORT of the test
tool. See Figure 7-2.