Fluke 125 User Manual

Fluke 125
Users Manual
1-2
Resetting the Test Tool
If you want to restore the test tool settings as delivered from
the factory, do the following:
c Turn the test tool off.
d Press and hold.
e Press and release.
The test tool turns on, and you should hear a double beep,
indicating the Reset was successful.
f Release.
Now look at the display; you will see a screen that looks
like Figure 1-2.
Figure 1-2. The Screen After Reset

Fluke 125 Specifications

General

Channels	2
Safety Rating	CAT III 600 V
Resistance Measurement	Yes
Continuity	Yes
Diode Test	Yes
Harmonics Measurement	Yes
Power Measurement	Yes
Weight	1.2 kg
Current Measurement	Yes
Type	ScopeMeter
Voltage Range	600 V