Fluke 125 - Making Selections in a Menu

Fluke 125
Users Manual
1-4
Making Selections in a Menu
How to use the menus is illustrated in the example below
on how to adjust the test tool for use with a certain printer
type:
c The user options menu pops up.
d Highlight PRINTER SETUP…
e Open the PRINTER SETUP
menu
f Highlight the required printer type
g Accept the printer type.
h Highlight the required baud rate
i Accept the baud rate. The menu
will be closed.
Notes
− Pressing
a second time closes this
menu and resumes normal measurement.
This toggling enables you to check the menu
without changing your settings.
− When you do not change an item with the
blue arrow keys, repeatedly pressing
enables you to step through a menu without
changing the setup of the test tool.
− Gray text in a menu or button bar indicates
that the function is disabled or the status is
not valid.