Plotting Measurements over Time (TrendPlotTM)
Changing the TrendPlot Reading
5
5-3
Changing the TrendPlot Reading
To toggle the secondary TrendPlot reading between MIN
(minimum), MAX (maximum), and AVERAGE, do the
following:
c
Change MIN into MAX reading.
d
Change MAX into AVERAGE
(AVG) reading.
Note that the date and time stamp now updates
continuously to indicate the most recent change in a
reading.
Making TrendPlot Cursor Measurements
Cursors allow you to make precise digital measurements
on the plotted graph(s). The display shows the
measurement results and the date and time at the cursor
position.
To use cursors do the following
c
Stop updating the graph and
freeze the screen.
d
Select CURSOR ON.
e
Select the maximum or minimum
plotted reading to be displayed.
From multiple readings during a
time slot, the minimum and the
maximum main are plotted.
f
Move the cursor to the desired
position on the graph.
Note
To resume updating the graph press
again.
To Next Page
Loading...
