Fluke 125 - Freezing the Screen; Holding a Stable Reading

Fluke 125
Users Manual
2-8
Freezing the Screen
You can freeze the screen (all readings and waveforms) at
any time.
c Freeze the screen. HOLD
appears at the bottom of the
reading area.
d Resume your measurement.
Holding a Stable Reading
The Touch Hold
®
mode captures a stable main (large)
reading on the display. When a new stable reading is
detected, the test tool beeps and displays the new
reading.
Use the following procedure for the Touch Hold function:
c Open the INPUT A menu.
d Enter the Touch Hold mode,
THOLD appears at the bottom of
the reading area.
e
BEEP
)))
Wait until an audible beep: now
you have a stable reading.
f Turn Touch Hold off and return to
normal measurement.